04-09 Toyota Prius ABS Pump Anti-Lock Brake Part Actuator And Pump Assembly OEM

  

SUGGESTED FITMENTS are not guaranteed! Listed part could be ONE of the options for listed vehicle, NOT the only option for it. Please do check, compare parts numbers first, see all pictures and feel free to ask any questions. Fitment guide = no guarantee!

[MUST MATCH PART NUMBER WE PROVIDE]. This is an overview of the process to replace your actuator. We recommend that you search YouTube and/or Toyota Prius forums for more comprehensive information. Here are the basic steps.

Disconnect your starter battery and both Hybrid Safety Disconnect Rear batteries. Take the windshield wiper assembly and the cowling off. This will give you access to the ABS actuator assembly.

Drain the inverter coolant, then remove the inverter. Use a voltmeter to be sure there is no voltage at the inverter connections.

Remove the cabin heat auxiliary water pump from it's mount, but do not disconnect the hoses. Remove the actuator mounting bolts. Disconnect all the brake lines from the actuator assembly. Install the new actuator assembly in the reverse order.

Reinstall and bleed the inverter. Bleed your brakes with Techstream.

Make sure your battery is fully charged. This process will take about an hour. Toyota Techstream (a diagnostic tool) for bleeding the brakes.

14 mm socket to remove wipers. 12 mm socket (1/4 inch). 10 mm socket (1/4 inch).

6 inch ratchet extension (1/4 inch). 10 mm box/open end wrench. 10 mm flare nut wrench (for hydraulic lines). 8 mm box/open end wrench. Torx T30 (for one bolt on the inverter cover). Large container and 1/4 inch flexible line for brake bleeding. 1/4 inch flexible tubing to bleed the inverter loop. 22 mm socket to remove inverter drain. At least 32 oz brake fluid.

A lot of shop towels. Heavy duty PVC gloves to protect you from electricity when removing the inverter, just in case. For Computer to function you must do the following three steps.

Step 1: Match your part number per above fitment guide. Step 2: Program ecu to your VIN. Step 3: If your vehicle has Anti Theft security (Most modern vehicles do) you must have your keys programmed. We recommend you have this done by a local automotive locksmith. In most cases they will travel to your location and the process takes less than 30 minutes.

No towing necessary and your local locksmith will be cheaper than a dealer. Please use compatibility chart as a guide only, and not as a guarantee of perfect fitting. Depending on your vehicle's options, this part might not fit your particular model. THIS IS A USED PART AND WILL SHOW SOME SIGNS OF WEAR. Please do check, compare parts numbers first, see all pictures of the actual part you will receive.

We also don't have parts for testing/diagnostic purposes and free labels for return. Engine Computers: Please be advised that all engine computers, bcm, bcu, emu, tcm, modules, ebx, ecu, etc. Have to be programmed by a licensed.

Shop or a dealer and for that reason are not returnable, unless supported by proper paperwork! Any labor cost is not refundable. Shifters and ignition key slots that have immobilizer chip build-in, and HAVE to be programmed to your vehicle at install, the car will not shift out of gear or even start! BE AWARE THAT MOSTLY ECU'S AND OEM ELECTRONIC COMPONENTS ARE NOT PLUG & PLAY SO PLEASE REMEMBER ABOUT THESE IMPORTANT THINGS. 1 EACH ECU / ELECTRONIC MODULE OR ANY OTHER OEM ELECTRONIC COMPONENT HAS TO BE MATCHED DIRECTLY BY PART NUMBER, SO PLEASE.

COMPARE IT TO YOUR ORIGINAL ONE BEFORE PLACING YOUR ORDER. 2 EACH ECU / ELECTRONIC MODULE OR ANY OTHER OEM ELECTRONIC COMPONENT REQUIRE CODING / PROGRAMMING DUE TO IMMOBILIZER FUNCTION. ACTIVATED OR STORED ORIGINAL DATA IN FLASH MEMORY SO IN CASE OF REPLACEMENT VISITING AT YOUR LOCAL ELECTRONIC WORKSHOP COULD BE NECESSARY. Thank You for Your Business!!

The item "04-09 Toyota Prius ABS Pump Anti-Lock Brake Part Actuator And Pump Assembly OEM" is in sale since Monday, April 19, 2021. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\ABS System Parts". The seller is "pkautoparts" and is located in Gastonia, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

1. Interchange Part Number: Toyota Prius W20 2006 ABS Pump 44510-47050
2. Location: EF3
3. Manufacturer Part Number: 44510-47050
4. Brand: Toyota