03-06 Silverado Tahoe Oem Abs Anti-lock Brake Control Module 13642515 Rebuilt

  
REBUILT CHEVY GM TRUCK SUV EBCM ABS ANTI-LOCK BRAKE CONTROL MODULE 13642515 40 PIN. 13642515 WITH PIN SET UP 40-6 Plus center connector completely different than standard GM ABS modules. NOTE: This EBCM has one mounting point that is missing.

2 of the larger connector lock tabs are missing however the other 4 should hold that connector firmly in place. EBCM will require programming/calibration to your vehicle. NOTE: The bottom gasket is not included. Be prepared to reuse the gasket from your original module if necessary.

EBCM will require programming to your vehicle. These units come out of many different vehicles with many different configurations, some with and some without traction control. Without programming/calibration it will not work for your vehicle. Module has been repaired and tested by our experienced technical staff! Some of those tests are listed below. Solder joints that typically fail have been repaired. 12+ internal components tested and repaired as necessary.

Relay which typically fails has been replaced. Techs are able to test communication, pump motor control, abs relay, All isolation valve controls, all dump valve controls and all wheel speed sensor circuits. Please follow below for proper installation of module. If you don't follow these steps you can surge the unit and kill the board. If this happens, we cannot take a return as we repair, power and communicate with all of these units.

Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post. Disconnect and remove module to be replaced. Make sure connector harness is clean and there are no broken wires.

Install and connect the replacement module. Connect the negative terminal of the battery. Calibration to the vehicle is now required. Again, this is optional and you are not obligated to send your ABS module back to us. Please keep a copy of your sales record which we will send with your order.

Your Part Source specializes in providing recycled oem auto parts and quality remanufactured auto parts! Serving our clients since 2008 our seasoned staff of electronic repair techs provides affordable alternatives to the high cost of new car parts. Purchasing a recycled auto part or a remanufactured part is also a great way to go green and help the environment. Choosing one of our reliable remanufactured parts also prevents our buyers from trudging through their local junk yard only to install a part that no longer works, ugh!

A growing Midwestern company, we pride ourselves on quality workmanship and superior customer service! Give us a try today! Our goal is to provide the best customer service possible! We have a guaranteed 24 hour response time to emails received 7 days a week 365 days a year!

We are here to serve you! Knowing trouble codes, symptoms, parts numbers etc etc will help our seasoned staff resolve any issues as quickly as possible so we can help get your vehicle up and running! We will do what we can to get you the part you need!

Every part is professionally pre-wrapped for protection before being boxed! We then use premium fill and boxes plus foam or bubble-wrap if necessary all to make sure you receive your part undamaged! This will help our staff work with you on a quick resolution!

We know purchasing parts for your vehicle can be confusing and frustrating. We would love to earn your business and provide a superior product and great customer service! We think you will be glad you did!